Front wheels help to go according to the direction turning the car left and right. Front bearing removal tool help to remove and install the bearing in the front wheel without damaging the hub and bearings. A wheel’s main component is bearing. It helps the wheel to spin freely with very little friction. This wheel bearing needs to be changed when it needed. Sometimes bearing gets damaged and sometimes it gets too old. A damaged bearing is risky for wheel and causes accidents. It also makes noise. There are many front wheel bearing removal tool and adapters in the market for both front and rear wheel bearing. Front wheel bearing adapters and tool help to remove and install front wheel bearing in the wheel. They help the removal and installation quicker and easier than doing these with bare hands and other tools. But it is a must to choose right front bearing tool for the right wheel of your vehicle. You can’t use a rear bearing tool for your front wheel or a wheel bearing removal tool for your rear wheel. Because it can damage your wheel bearings. There is some great front wheel bearing adapters and tools including front wheel bearing puller and press tool in the market which you can use. If you are in hurry, than try this short brief according to out top pick –
- Reduction of the use of front line alignment
- Black oxide finishing
- Easy removal
- Faster installation
- Perfect for front wheel car and truck
Pros: ATD Tools 8625 Bearing Adapter Kit replaces wheel bearing by making the knuckle and strut intact. It does not need front end alignment after work is done. This front wheel bearing adapter has the facility of black oxide finish and it is perfect for the front wheel of car and light truck. Moreover, it is packed in a custom,. case which is very convenient for storage. Cons: Its bolt threads are soft for removing the wheel bearing.
- Works perfectly without removing knuckle
- Provides maximum force using minimal force
- Jaws fit perfectly with the hub
- The best for hub and bearing solution
- Saves time and energy
Pros: If you need a complete solution for your front wheel bearing, OTC (6575) Kit is the right one for your removal of hub and bearing from your wheel. With its maximum force with minimal effort facility, it has an impact gun too, for saving your time. It has equalizer washer which gives smooth operation of the removal. Without using any fasteners it can remove bearing fast with its properly designed jaws.
- Perfect for front wheel van, light truck and car
- 19 piece puller
- High performance
- Matched with different sizes of hub screws
- Easy use
- Long lasting performance
Pros: Dragway Universal Bearing Removal set has total 19 pieces for all kinds of removal and installation of front wheel bearings. Having the facility of heavy duty work, it is suitable for cars, vans and light trucks too. For the removal and installation it does not need any dismantle of steering assembly. It also includes carrying case for its safety.
ABN 23 Piece Wheel Bearing Tool Set
- No need for front line alignment
- Different drift sizes for convenience
- Usable with steering knuckle and strut assembly
- Faster removal and installation
- Durable case for safety
Pros: ABN 23 Piece Wheel Bearing Tool Set is designed for removal and installation while keeping the strut assembly and steering knuckles on the vehicle. Its unique design enables zero damage to the hub and bearings while removal and installation and it also does not need front end alignment. Its drift sizes are 50, 55, 60, 64, 67, 70, 72, 74, 75, 78, 82,84, and 88mm and its drive shafts sizes are 23mm & 38mm. The black oxide gives a smooth finish of the task and its durable molded case protects it from any kind of damages while carrying and shipping. Cons: It works well in installation than removal.
- Simple installation and removal
- Works on domestic and imported vehicles
- Long lasting
- 27-piece set
- Storage case included
Pros: Alltrade 648741 Kit is the most reliable tool kit for front wheel bearing removal and installation according to the manufacturer. It has the facility to work for both rear and front wheel and it can be used while the steering knuckle and strut assembly still on the vehicle. Its 23 pieces of tools help you to work with both domestic vehicles like cars and vans and also with imported FWD vehicles. It has storage case and it includes instruction photos on it for its usage.